Run the workAuto repair

QuickBooks for Auto Repair Shops: Setup Tips That Work

Find out which QuickBooks version fits your auto repair shop, how to set up accounts, track parts and labor, and connect it to your shop software.

By Jonathan · November 19, 2026 · 12 min read

You're running an auto repair shop. You've got three bays, a couple of techs, and you're doing solid work. But at the end of the month, you're not quite sure where the money actually went. You know you made money on that transmission rebuild - but did you? Parts cost you $45, you billed $90, that's profit, right? Except your spreadsheet doesn't really tell you. Your shop management software tracks the work, but it doesn't talk to your accounting. So you're entering invoices twice, reconciling by hand, and your accountant is asking questions you can't answer.

QuickBooks for auto repair shops solves this. It's accounting software that tracks every dollar in and out, separates labor from parts so you can see which one actually makes money, and connects to your shop software so you stop doing double work. Here's what you need to know to set it up right.

In This Article

  1. What Does QuickBooks Actually Do for an Auto Repair Shop?
  2. Which QuickBooks Version Should an Auto Repair Shop Use?
  3. How Do You Set Up a Chart of Accounts for an Auto Repair Shop?
  4. Creating Invoices and Tracking Parts in QuickBooks
  5. Does QuickBooks Integrate with Auto Repair Shop Software?
  6. What Are the Limits of QuickBooks for Auto Repair Shops?
  7. Frequently Asked Questions About QuickBooks for Auto Repair Shops
  8. Wrapping Up

What Does QuickBooks Actually Do for an Auto Repair Shop?

QuickBooks handles accounting: invoicing customers, tracking what you spend, paying bills, running payroll, and building reports that show profit and loss. It does not manage repair orders, schedule appointments, look up VINs, or pull labor guides. That's what shop management software does.

Here's the honest split:

Function QuickBooks Shop Management Software
Create and send invoices Yes Yes (usually)
Track parts and labor costs Yes (if set up right) Yes
Record vendor bills Yes Sometimes
Run profit/loss reports Yes Limited
Schedule appointments No Yes
Create repair orders No Yes
Pull labor guides and flat rates No Yes
Track vehicle history and VINs No Yes

Most shops run both. QuickBooks is your accounting backbone. Shop management software - like Tekmetric, Mitchell 1, or Shop-Ware - is where you manage the day-to-day work. They talk to each other if you set them up right, so you're not typing the same invoice twice.

QuickBooks Online vs. Desktop: Online is cloud-based, accessible from anywhere, and automatically backs up. Desktop is installed on one computer, costs less upfront, but you have to back it up yourself and it's harder to share. For a growing shop, Online makes more sense. You can add users, pull up your books from the service bay if you need to, and you don't have to worry about losing everything if your computer dies.

Which QuickBooks Version Should an Auto Repair Shop Use?

Start with QuickBooks Online Essentials. It's the minimum tier that gives you what a repair shop actually needs.

Here's why each tier matters:

Plan Users Key Features Best For
Simple Start 1 Basic invoicing, expense tracking Solo shops, very small
Essentials 3 Multi-user, bill tracking, basic reports Most independent shops
Plus 5 Class tracking (per bay), inventory, projects Multi-bay shops, parts tracking
Advanced 25 Advanced reporting, custom fields, API access Large shops, complex workflows

Essentials gets you there. You can invoice customers, track what you spend, pay vendors, and run reports. Three users means you, your office manager, and maybe a tech can all log in.

But here's the thing: if you have multiple bays and you want to know which bay is actually profitable, or if you track parts inventory, you need Plus. Class tracking lets you assign every transaction to a specific bay or service type. So you can see: "Bay 1 made $8,000 this month, Bay 2 made $6,500." That's the difference between guessing and knowing.

The price difference between Essentials and Plus is modest. If you have two bays and you want to know which one is pulling its weight, the upgrade pays for itself quickly.

When to consider Desktop: If you're running a high-volume shop with complex job costing and you'd rather make a one-time purchase than pay monthly, QuickBooks Desktop Pro might cross your mind. But Intuit is phasing Desktop out, and it doesn't sync to the cloud automatically. For most growing shops, Online is the right call.

How Do You Set Up a Chart of Accounts for an Auto Repair Shop?

This is where most shops get stuck. According to WickedFile's QuickBooks best practices guide, they use QuickBooks' default chart of accounts, which is built for a generic business. You need one built for auto repair.

Your chart of accounts is the list of buckets where every transaction goes. Income goes in one bucket, rent in another, parts in another. At the end of the month, QuickBooks adds them all up and tells you what you made and what you spent.

For an auto repair shop, you need to separate labor from parts. Here's a ready-to-use template:

Income Accounts:

  • 4010 Labor Revenue (flat-rate hours, hourly labor, diagnostics)
  • 4020 Parts Revenue (parts you mark up and sell)
  • 4030 Sublet Revenue (work you send out and mark up - alignment, glass, transmission)
  • 4040 Shop Supplies Income (if you charge for shop supplies separately)
  • 4050 Tire Sales (if you sell tires)

Cost of Goods Sold (COGS) Accounts:

  • 5010 Parts Purchased (parts you buy for jobs)
  • 5020 Sublet/Outside Labor (what you pay the alignment shop, glass shop, etc.)
  • 5030 Shop Supplies Used (if you track this separately)

Expense Accounts:

  • 6010 Technician Wages (hourly pay, flat-rate pay, bonuses)
  • 6020 Shop Rent or Lease
  • 6030 Equipment Depreciation
  • 6040 Liability Insurance
  • 6050 Vehicle Maintenance (for your service van)
  • 6060 Tools and Equipment (under $500, expensed immediately)
  • 6070 Utilities (electric, water, compressed air)
  • 6080 Office Supplies

Why this matters: When you separate labor revenue from parts revenue, your profit-and-loss report shows you the truth. According to Kaizen CPAs' guide to measuring repair shop metrics in QuickBooks, you should target parts gross profit of 50–55% and labor gross profit of 65–70%. Say you made strong revenue in labor and solid revenue in parts - but your parts cost was half what you charged. That means parts are a real margin driver. Your labor has almost no COGS, so it's nearly all profit. Now you know where to focus your pricing attention.

How to add these accounts in QuickBooks Online:

  1. Go to Accounting (left menu).
  2. Click Chart of Accounts.
  3. Click New (top right).
  4. Choose Account Type (Income, Expense, Cost of Goods Sold, etc.).
  5. Choose Detail Type (Service/Labor Income, Product Income, Rent or Lease, etc.).
  6. Enter the account name and number (e.g., "4010 Labor Revenue").
  7. Click Save and Close.

Do this for each account above. It takes about 20 minutes.

Pro tip: Once you've built your chart of accounts, set up your labor and parts as Items in QuickBooks (Products & Services section). Assign each item a sales price and a COGS account. When you invoice a customer, you pick the item - "Oil Change Labor" or "Brake Pads" - and QuickBooks automatically records the revenue and the cost. This is how you track margin per job without manual entry.

Creating Invoices and Tracking Parts in QuickBooks

An invoice in QuickBooks is where labor and parts come together. You're billing the customer for the work you did and the parts you used. LocalRestart can help you connect your shop software to QuickBooks so each job and payment only gets entered once.

Here's how it works:

Step 1: Create the invoice. Go to + New (top left) and pick Invoice. Enter the customer name, date, and due date.

Step 2: Add line items. For each line, you pick an item - "Brake Pad Replacement Labor" or "Brake Pads." QuickBooks fills in the price and the account it goes to. If you set up your items right, labor goes to 4010 Labor Revenue and parts go to 4020 Parts Revenue.

Step 3: Track the cost. When you buy brake pads for $45 and bill them at $90, here's what happens:

  • The $90 goes to Parts Revenue (4020).
  • The $45 goes to Parts Purchased (5010), which is COGS.
  • Your gross profit on that line is $45 - a clean 50% margin.

QuickBooks tracks this automatically if you set up the item with both a sales price and a COGS account.

Step 4: See the margin. Run the Sales by Product/Service Summary report (Reports menu). It shows you revenue, cost, and gross profit for each item. You'll see exactly which services and parts are making money.

Parts purchases: When you buy parts from NAPA or AutoZone, you have two options.

Option 1: Record a vendor bill in QuickBooks. Go to + New > Check or Bill, enter the vendor, the amount, and assign it to Parts Purchased (5010). This is the cleanest way because it matches the invoice to the bill.

Option 2: If you're paying cash or using a credit card, just record the expense directly to Parts Purchased when you reconcile your bank account. QuickBooks will match the transaction.

Sales tax: This is state-specific and easy to get wrong. In most states, labor is not taxed but parts are. So on a $500 invoice with $300 labor and $200 parts, you'd charge tax only on the $200.

QuickBooks has an automated sales tax feature. When you set up an item, you mark it as taxable or non-taxable. Labor items are non-taxable. Parts items are taxable. When you create an invoice, QuickBooks calculates tax based on your customer's location and the items you've marked.

Important: Some states - like Ohio and Virginia - will tax the entire invoice if you don't separately state labor and parts. So make sure your invoices show line items, not a lump sum. QuickBooks does this by default, but double-check your setup.

Does QuickBooks Integrate with Auto Repair Shop Software?

Yes. Most major shop management platforms sync with QuickBooks Online. Here's what you need to know:

Platform Integration Type What Syncs
Tekmetric Native API Invoices, payments, customer data
Mitchell 1 Manager SE Batch export Financial data, invoices (periodic)
Shop-Ware Native API Repair orders, payments, parts data
AutoLeap Native API Invoices, payments, vendor bills
GEM-CAR Bridge (third-party) Financial data (monthly sync)

What this means in practice: When you complete a repair order in Tekmetric, the invoice automatically shows up in QuickBooks. You don't type it twice. Payments sync too, so your bank reconciliation goes faster.

The catch: If both systems create invoices, you'll end up with duplicates. This is the double-entry trap. The fix is simple - designate one system as your invoicing source of truth. Usually that's your shop management software. It creates the invoice, and QuickBooks just receives it for accounting. Don't create invoices in both places.

Real example: You use Tekmetric for repair orders. A customer drops off a car for brake work. Your tech creates a repair order in Tekmetric, adds labor and parts, and marks it complete. Tekmetric sends the invoice to QuickBooks automatically. You see it in QuickBooks, reconcile the payment when it comes in, and you're done. One entry, not two.

If you're using Mitchell 1, the sync is less automatic - you export from Mitchell 1 and import into QuickBooks periodically. It's more manual, but it still beats typing everything by hand.

What Are the Limits of QuickBooks for Auto Repair Shops?

QuickBooks is accounting software. It's not a shop management system. Here's what it simply doesn't do:

  • No repair orders. You can't create a work order in QuickBooks. You need shop management software for that.
  • No VIN lookups or vehicle history. QuickBooks doesn't know what car came in or what work was done before.
  • No labor guides or flat-rate books. You need Mitchell 1 or another shop platform for that.
  • No appointment scheduling. QuickBooks doesn't manage your calendar or your techs' schedules.
  • No parts inventory management. If you have a warehouse full of parts, QuickBooks can track it, but it's not really built for that. Dedicated inventory software handles it better.
  • No flat-rate payroll calculation. QuickBooks doesn't calculate flag-hour pay automatically. You have to work that out separately and enter it as a custom pay type.

When to add shop management software: Once your shop is doing meaningful volume, you probably need both. QuickBooks handles the money. Shop management software handles the work. Together, they give you the full picture.

The real question: Do you want to manage your books in QuickBooks and your work in shop software? Or do you want one platform that does everything adequately? Most shops that care about profit choose the first option - they get better reporting and better work management, even if it means paying for two tools.

Frequently Asked Questions About QuickBooks for Auto Repair Shops

How much does QuickBooks cost for an auto repair shop per month?

Direct Answer: According to AutoVitals' comparison of accounting software for auto repair shops, QuickBooks pricing is $15–$100/month depending on the plan. Essentials and Plus are the two tiers most repair shops land on, with Plus running about $25 more per month than Essentials.

Essentials includes invoicing, bill tracking, and basic reports for up to three users. Plus adds class tracking - so you can track profit per bay - and inventory items. If you're a solo shop or have one office person, Essentials is enough. If you have multiple bays or you track parts, Plus is worth the difference.

Is QuickBooks Online better than QuickBooks Desktop for a mechanic shop?

Direct Answer: Yes, for most shops. Online is cloud-based, accessible anywhere, and automatically backs up. Desktop is installed on one computer and requires manual backups.

Online also integrates better with modern shop management software. Desktop is being phased out by Intuit. The only real reason to choose Desktop is if you have complex job costing needs and prefer a one-time purchase - but that situation is rare for most independent shops.

Can QuickBooks track parts inventory for an auto repair shop?

Direct Answer: Yes, but only in Plus or higher. Essentials doesn't include inventory tracking.

If you buy parts per job and don't stock inventory, you don't need this feature - just record the cost when you buy it. But if you have a parts shelf and want to know what you have on hand at any given moment, Plus lets you track quantity and cost. It's genuinely useful if you buy in bulk or want to keep an eye on your parts investment.

How do I record labor and parts separately in QuickBooks?

Direct Answer: Set up separate income accounts (4010 Labor Revenue, 4020 Parts Revenue) and separate COGS accounts (5010 Parts Purchased). Then create items for labor and parts, assign each item to the right account, and use those items on your invoices.

When you invoice a customer, you pick "Brake Pad Replacement Labor" - which flows to Labor Revenue - and "Brake Pads," which flows to Parts Revenue. QuickBooks automatically records the revenue and the cost. Your profit-and-loss report then shows labor profit and parts profit side by side.

Does QuickBooks work with Mitchell 1 or Tekmetric?

Direct Answer: Yes. Tekmetric syncs invoices and payments automatically via API. Mitchell 1 exports data periodically. Both work, but Tekmetric is more seamless.

With Tekmetric, you complete a repair order and the invoice appears in QuickBooks automatically. With Mitchell 1, you export from Mitchell 1 and import into QuickBooks on a schedule. Either way, you're not typing invoices twice.

What is the best free alternative to QuickBooks for a small auto shop?

Direct Answer: Wave Accounting is free for invoicing and basic accounting, though it has payroll and payments as paid add-ons.

Wave works if you're just starting out and want to avoid monthly fees. But it lacks inventory tracking and solid payroll integration, which most shops need as they grow. QuickBooks Essentials is worth the monthly cost once your shop is generating real revenue.

Do I need an accountant to set up QuickBooks for my repair shop?

Direct Answer: You can set it up yourself if you follow a template. But a bookkeeper or accountant can save you time and prevent mistakes, especially around sales tax and COGS setup.

The chart of accounts is the hardest part. Get that wrong and your reports are wrong. A good bookkeeper can set up QuickBooks for a shop for a reasonable one-time fee, and it pays for itself in cleaner books and better decisions. LocalRestart can connect your shop software to QuickBooks so each job and payment only gets entered once - that's the setup most shops actually need.

Wrapping Up

QuickBooks for auto repair shops is straightforward once you understand the pieces. You need the right version - Essentials or Plus - a chart of accounts built for auto repair that separates labor, parts, and sublet, and a connection to your shop management software so you're not entering data twice.

The payoff is simple: you'll know your profit by service type, by bay, by month. You'll see which parts are your margin drivers. You'll catch cash flow problems before they turn into real headaches. And your accountant will stop asking questions you can't answer.

Start with the chart of accounts. Get that right, and everything else follows.